25% discount when purchased with skis
3.199,20 kr
3.999,00 kr
First, the plate on the front housing must be adjusted to fit the sole of your boot. This is done by rotating the star screw (PZ3) located at the very front of the front housing. Adjust it so that the boot cannot move up or down. Next, adjust the rear housing with the star screw (PH2) located at the back. When the binding is correctly adjusted, it should be flush with the plastic around the screw.
The release value is adjusted on both the front and rear housings. On the front housing, there is a star screw (PH2) on the side and a scale on top. On the rear housing, there is a star screw (PH2) at the very back, as well as a scale.
Make sure the rear housing is pressed down. Then, step firmly into the binding to lock the boot in place.
DIN value: 6 - 16
Weight:
Adjustment:
Recommended on the following models: Frikar, Streifar, Rakkar, urRakkar & Tunnelvision
Share your Mark Jester 16 photos on Instagram and get published here!
Veldig fornøyd med mitt kjøp hos sgn, super service
Takk Rasmus! Det var hyggelig å høre.
Bård / SGN
The bindings are great, and would be perfect if they could be adjusted more in length (preferably without tools).
